 |
Tiller - Rotary Tiller - Roto Tiller - Bercomac
|
|
 Rototiller Video Clip
|
|
The tiller comes completely assembled with under-mount drive and lift mechanisms. It is easy to install with 2 brackets under the transaxle and one shoulder bolt on the tractor frame. It clips on and off after the first time setup. It's offset to the right side to cover the tire tracks. Model 700312 $1700. |
This is a universal mount roto tiller is made for tractors from 14 to 27 horsepower that have vertical engines (the mower deck pulley is located under the engine) and is equipped with an electric or manual clutch. The riding lawn mower or garden tractor must be equipped with the the transaxle bolt pattern that has 2 sets of holes measuring 16/ 1/4" center to center as do new aluminum transaxles.
700319 Option - Clutch mechanism kit is needed to mount the rotary tiller if the tractor or riding lawn mower is equipped with a manual clutch activated by a rod, short cable, or spring. |
|
| |
|
|
Width: 30"
Tilling depth: 0 to 6 inches
Has 16 Tines
Belt driven
Weighs 275 lbs. |
|
The term "Universal Mount" is to mean it will fit a variety, but not all, garden tractors or riding lawn mowers.
If you are looking for used tillers or a different variety, check out ourattachmentspage. This Bercomac rotary tiller fits on many different makes and models of tractors, Call1-800-618-8738 or e-mailjims.tractors@gmail.comfor more details on your tractor model.
|
Rotary Tiller - Roto tiller questions and answers:
|
Q: I am interested in a tiller for my X304 John Deere It has a vertical engine, but has rear steering for a close turn radius. Do you know if your tiller will fit my mower?
A: If you have a 14” or 16 1/4" bolt pattern on your rear housing this should bolt up.
Q: I have a White LT-1650. Will your tiller work on my tractor?
A: It will work if you have a vertical shaft engine.
Q: Will the Rotary Tiller fit my LX280 John Deere lawnmower?
A: Yes, the rototiller can be installed on your tractor.
Q: I am looking for a rear tiller for my 322 John Derre. 30 inch is okay, alittle bigger would be nice. I will need everything to mount it and operate it. I am putting it on a bare tractor.
A: Yes, I have a new Berco 30" rototiller for your tractor.
Q: Hi, will you lawn tractor rototiller mount to a John Deere GX 345?
A: Yes our roto-tiller will mount on your John Deere GX 345.
Q: Will this tiller fit a John Deere 335 Garden Tractor?
A: Yes, this new Bercomac rototiller will fit on a John Deere 335. You have the vertical shaft engine and that is what is called for on this rototiller.
Q: Will your Bercomac rotary, 30 inch tiller fit on 0 John DeereGT245 Garden Tractor?
A: This rotary tiller will bolt onto your garden tractor as long as you have 2 sets of holes in your back axle about 16 1/4" apart. Check yours out and measure the distance. |
Toll Free: 1-800-618-8738 *Free outdoor power equipment tech support
